VM28/213 Genuine Mikuni pilot jets

Jetting products are NOT returnable-these are tuning parts therefore no returns or exchanges. If planning on returning jets please order from another place that sells used, drilled out and counterfeit jets. There are too many variables to ensure the jets listed below will fit the carb. Pull the jets from the carb and measure them first. If incorrect jets are ordered it will be unpleasant when they arrive, just delay the tuning process, waste time, be frustrating, still wont have the correct jet and will end up measuring in the end. We have advised to measure, if advice is ignored the frustration is your fault, don't blindly purchase jets like a novice. MEASURE YOUR JETS, cant figure it out see our FAQ extreme top left of page and read "identify that jet" link. things to check before ordering.

Mikuni Pilot Jet VM28/213


OVERALL LENGTH = 28mm
THREAD DIAMETER = 3.9mm
TIP DIAMETER = 2.0mm
LARGE DIAMETER = 5mm

GENUINE mikuni jets - price each
GENUINE Mikuni jet size 15 $7.49
GENUINE Mikuni jet size 17.5 $7.49
GENUINE Mikuni jet size 20 $7.49
GENUINE Mikuni jet size 22.5 $7.49
GENUINE Mikuni jet size 25 $7.49
GENUINE Mikuni jet size 30 $7.49
GENUINE Mikuni jet size 35 $7.49
GENUINE Mikuni jet size 40 $7.49