TMS/TMX SERIES (EARLY STYLE)


tms/tmx early style carb rebuild kit

Carburetor rebuild kit 007-950
Carburetor rebuild kit (for use with fuel pump) 007-951

2. NEEDLE use the chart then click the NEEDLE link, then on needle page, scroll down the needle page until the needle is located.

3. Cover, Carb Top 776-19014 002-451
4. Lock Nut, Adjuster B30/247 002-065
5. Cap, Rubber VM34/282 002-452
6. Adjuster, Cable VM30/77 002-453
7. O-Ring, Top Cover 616-93009 002-454
8. E-Ring, Needle Clip BS32/126 002-455
9. Ring, Retaining TM38/54 002-456
10. Adjuster, Idle Stop 603-25008 002-457
11. Spring, Idle Adjust N110.209 002-655
12. Plunger, Starter Assy. VM29/47 002-816
13. Screw, Air Adjuster 603-36002 002-459
14. Spring, Air Screw VM15/112 002-863
15. Chamber, Float Bowl TM38/48 002-461
16A. Valve Seat, Needle Assembly. 786-36004 (3.5) 002-466 for gravity fed fuel
16B. Valve Seat, Needle Assembly. 786-36004-A (1.8) 002-464 for fuel pump
16C. Needle Valve only 788-26005 002-469
17. Pilot Jet VM22/210
18. Main Jet 4/042
23. Cap, Float Retainer VM26/42 002-718
24. Screw, Top Cover 4 x 12mm CW2=0412 002-748
25A. Throttle valve TMX (see chart below)
25B. Throttle valve TMS (see chart below)
26. Spring, Throttle valve 730-13019 002-477
27. Hose, Vent (Black) 888-24011 002-478
28. Screw, Float Bowl 3 x 8mm CW2=308 002-479
29. Hose, Overflow 888-23022 002-480
30. Float, Left Side 859-52021 002-482
31. O-Ring, Drain Plug BN042/64 002-602
32. Drain Plug TM38/44 002-483
33. Float, Right Side 859-52020 002-481
34. Gasket, Float Bowl TM38/52 002-484
3.0 999-832-014-3.0 002-472 NA
3.5 999-832-014-3.5 002-473
4.0 999-832-014-4.0 002-476 NA
5.0 999-832-014-5.0 002-474
6.0 999-832-014-6.0 002-475
 
250cc 3.0mm 2.0mm 999-832-017 “1G” 007-410 NA
125cc 2.0mm 1.4mm 999-832-017 “1H” 007-411
 

007-731This adjuster has threads on one end, the other end swivels. Includes rubber cap, locknut, cable adjuster and 90º tube. Works on Keihin and Mikuni carburetor caps.

The kit 007-731 contains:
002-061 rubber cap
002-065 nut
007-757 adjuster
007-759 90 degree threaded tube