N151.067 Genuine mikuni jets

Jetting products are NOT returnable-these are tuning parts therefore no returns or exchanges. If planning on returning jets please order from another place that sells used, drilled out and counterfeit jets. There are too many variables to ensure the jets listed below will fit the carb. Pull the jets from the carb and measure them first. If incorrect jets are ordered it will be unpleasant when they arrive, just delay the tuning process, waste time, be frustrating, still wont have the correct jet and will end up measuring in the end. We have advised to measure, if advice is ignored the frustration is your fault, don't blindly purchase jets like a novice. MEASURE YOUR JETS, cant figure it out see our FAQ extreme top left of page and read "identify that jet" link. things to check before ordering.

Mikuni Pilot K&L 18-4832 N151.067


OVERALL LENGTH = 14 mm
THREAD DIAMETER = 4.9 mm
No cross drilled holes in shaft. To order other versions check here identify that jet.

GENUINE mikuni jets - price each   OEM EQUIVALENT mikuni jets - price each
GENUINE Mikuni jet size 30 $7.49
 
OEM equivalent Mikuni jet size 30 $5.89
GENUINE Mikuni jet size 32.5 $7.49
 
OEM equivalent Mikuni jet size 32.5 $5.89
GENUINE Mikuni jet size 35 $7.49
 
OEM equivalent Mikuni jet size 35 $5.89
GENUINE Mikuni jet size 37.5 $7.49
 
OEM equivalent Mikuni jet size 37.5 $5.89
GENUINE Mikuni jet size 40 $7.49
 
OEM equivalent Mikuni jet size 40 $5.89
GENUINE Mikuni jet size 42.5 $7.49
 
OEM equivalent Mikuni jet size 42.5 $5.89
GENUINE Mikuni jet size 45 $7.49
 
OEM equivalent Mikuni jet size 45 $5.89
GENUINE Mikuni jet size 47.5 $7.49
 
OEM equivalent Mikuni jet size 47.5 $5.89
GENUINE Mikuni jet size 50 $7.49
   
GENUINE Mikuni jet size 52.5 $7.49
   
     
GENUINE Mikuni jet size 60 $7.49